How-to Guides

EVO - Unboxing and getting started
EVO - Unboxing and getting started
Mon, 15 Oct, 2018 at 9:36 AM
EVO - Loading Filament
The EVO’s filament loading system makes it easy load, remove and prime the hot end before, during or after printing. Follow these steps to learn how to inse...
Tue, 19 Oct, 2021 at 4:30 PM
Getting Parts to Stick - Proper Bed Preparation
Good bed adhesion is one of the most important factors to getting a great-looking part. It is especially important when printing higher-temperature material...
Wed, 5 Jan, 2022 at 12:40 PM
EVO - Changing the Nozzle
The EVO comes equipped with aircraft-grade aluminum nozzles that can be used for several prints. These nozzles will wear down eventually, depending on how m...
Tue, 19 Oct, 2021 at 2:43 PM
EVO - Changing the Hot End
Many high-end 3D printers require large service fees, and in most cases require a technician to perform repairs or upgrades. When designing the EVO,  Airwol...
Tue, 19 Oct, 2021 at 2:58 PM
EVO 3D Printer X/Y Axis Offset Calibration
Dual head 3D printing can be complex and at times frustrating, especially if the machine you are using is not set up properly. Print settings and material c...
Tue, 19 Oct, 2021 at 3:56 PM
EVO - Z Offset - Set the First Layer Offset
One of the most important factors that determines whether a 3D print will be successful or not is the set distance from the nozzle to the bed on the first...
Tue, 19 Oct, 2021 at 3:31 PM
EVO - Z Calibration With Dual Nozzle Leveling
Airwolf 3D has released many advanced features within the latest update of the Matrix touchscreen found on the EVO Additive Manufacturing Centers. Upda...
Wed, 12 Jan, 2022 at 10:24 AM
EVO - Restore Print Function
When using machines with large build volumes, it is important that you are able to create parts with long print times reliably. Sometimes parts can take s...
Tue, 19 Oct, 2021 at 3:36 PM
EVO - Remote Printing with APEX
Adding functionality to Apex is a top priority at Airwolf 3D, and the new list of features and advancements within the EVO touchscreen interface and Apex ...
Tue, 19 Oct, 2021 at 4:53 PM