How-to Guides
This video shows the unboxing of the standard EVO, although it is very similar to the EVO R and EVO 22 machine unboxing. For the EVO 22, it is recommended t...
Wed, 5 Jan, 2022 at 3:28 PM
EVO22 - Video Guide to large part printing
Mon, 15 Oct, 2018 at 8:56 AM
(should take 30 minutes or less): *pictures to follow 1) Turn machine off 2) Remove back panel 3) Take pictures of wiring connections (they should...
Tue, 5 Nov, 2019 at 2:55 PM
The EVO’s filament loading system makes it easy load, remove and prime the hot end before, during or after printing. Follow these steps to learn how to inse...
Wed, 12 Jan, 2022 at 9:56 AM
Good bed adhesion is one of the most important factors to getting a great-looking part. It is especially important when printing higher-temperature material...
Wed, 12 Jan, 2022 at 9:57 AM
The EVO comes equipped with aircraft-grade aluminum nozzles that can be used for several prints. These nozzles will wear down eventually, depending on how m...
Wed, 12 Jan, 2022 at 10:00 AM
Many high-end 3D printers require large service fees, and in most cases require a technician to perform repairs or upgrades. When designing the EVO, Airwol...
Wed, 12 Jan, 2022 at 10:02 AM
Dual head 3D printing can be complex and at times frustrating, especially if the machine you are using is not set up properly. Print settings and material c...
Wed, 5 Jan, 2022 at 12:43 PM
One of the most important factors that determines whether a 3D print will be successful or not is the set distance from the nozzle to the bed on the first...
Wed, 5 Jan, 2022 at 2:12 PM
Airwolf 3D has released many advanced features within the latest update of the Matrix touchscreen found on the EVO Additive Manufacturing Centers. U...
Wed, 12 Jan, 2022 at 10:29 AM