Description: 

Use this solution to help the printed parts adhere to the bed during the print.


1) Find your material in the table below

2) Apply the correct glass preparation 

 (Any glass preparation will be done on top of the glass, NOT the red heat bed)

3) Apply the correct solution on top of Step 2 

 (If "none" is selected for step 2, apply the solution directly on top of the glass)

 

NOTE: WolfBite and Wolfbite Nano will be applied directly to the Borosilicate glass provided by Airwolf 3D or the Flex-Resistant Borosilicate Glass available for purchase.