How-to Guides
Connect via WiFi: 1. Select SETTINGS 2. Select WI-FI SETTINGS 3. Choose your network and enter your password 4. Select CONNECT Connect v...
Fri, 9 Nov, 2018 at 2:13 PM
Update the Touchscreen on your EVO by performing the following steps: 1. Make sure EVO is connected to the internet 2. Select SETTINGS ...
Fri, 9 Nov, 2018 at 2:28 PM
NOTE: Once Touchscreen is up to date, latest firmware for GENESIS microcontroller will become available in Touchscreen’s internal drive. 1. Select SETTI...
Fri, 9 Nov, 2018 at 2:28 PM
ScreenLock protects your work by locking the Touchscreen and preventing others from changing settings on the machine. NOTE: ScreenLock feature is only a...
Fri, 9 Nov, 2018 at 2:59 PM
By default, your Touchscreen passcode is 0000. To change your password, navigate to SETTINGS > DIAGNOSTICS > CHANGE PASSWORD. Passcodes must be 4-...
Fri, 9 Nov, 2018 at 2:59 PM
(should take 30 minutes or less): *pictures to follow 1) Turn machine off 2) Remove back panel 3) Take pictures of wiring connections (they should...
Tue, 5 Nov, 2019 at 2:55 PM
This guide will show you how to replace the touchscreen Raspberry Pi board on the EVO Additive Manufacturing Machine. Turn off the machine. By ...
Mon, 27 Dec, 2021 at 1:15 PM
Please note: OctoPrint Anywhere will be succeeded by The Spaghetti Detective, a faster and more powerful remote monitoring tool. If you are using the new Sp...
Wed, 29 Jan, 2020 at 3:21 PM
When 3D printing models with overhangs or steep angles, the printer will extrude material under prone areas in order to keep the part from collapsing under ...
Wed, 12 Jan, 2022 at 10:57 AM
In Part 1 of the Support Material series, we covered why support material is needed, and how to use the Quickprint menu in APEX to generate easy support for...
Wed, 12 Jan, 2022 at 10:57 AM