Maintenance
Every 100 hour print hours, clean nozzles for accurate auto-leveling 1. Press SERVICE MODE. 2. Power down machine. 3. Carefully take wire brush ...
Fri, 9 Nov, 2018 at 2:13 PM
Every 100 print-hours, clean bed rails for accurate auto-leveling. 1. Auto home and power down machine 2. Use razor blade to scrape film off steel b...
Wed, 7 Nov, 2018 at 3:52 PM
Every 1000 hours of print time, replace both HEPA and carbon filters. 1. With the build plate clear, select CONTROL 2. Use the pointer to push the Z...
Fri, 9 Nov, 2018 at 2:58 PM
Replace brass brush every 1000 hours, or sooner, depending on condition. 1. Place machine in SERVICE MODE 2. Use 2.5mm hex wrench to unscrew bo...
Fri, 9 Nov, 2018 at 3:01 PM