Filament
Description:
This solution goes over what a mouse bite is, potential causes of mouse bites, and how to fix them. You will need a set of wire or plas...
Mon, 3 Aug, 2015 at 11:57 AM
Printer Configuration Type - Bowden Extruder
The extruder assembly (located on the back of the printer) uses stepper motors to drive filament throug...
Mon, 17 Aug, 2015 at 10:24 AM
TABLE OF 3D PRINTER MATERIALS AND FILAMENTS
3D PRINTING MATERIALS
Sorty by Name
Description
Sort by User Class
ABS Add ABS t...
Mon, 3 Aug, 2015 at 11:57 AM
Printer Configuration Type - Bowden Extruder
The extruder assembly (located on the back of the printer) uses stepper motors to drive filament thro...
Mon, 3 Aug, 2015 at 10:09 AM
Description:
The following is a list of our printers and the materials compatible with each model. For information on where to purchase some of thes...
Fri, 31 Jul, 2015 at 11:39 AM
Description:
The following is a list of compatible HDR and HD2x material combinations and the uses that would be associated with the combination. In...
Mon, 3 Aug, 2015 at 10:07 AM
Description:
All of our printers use filament with a nominal diameter of 3mm and an actual diameter of 2.85±0.10mm
The following list will ...
Mon, 3 Aug, 2015 at 11:57 AM
Description:
This is a simple 7 step process to creating a polished look to your ABS parts using acetone.
Required Tools:...
Mon, 3 Aug, 2015 at 11:58 AM
Description:
The following will give you step by step instructions for coating your ABS part with epoxy to toughen and help protect your part from ...
Mon, 3 Aug, 2015 at 11:58 AM
Description:
The following describes our new EXPERIMENTAL process used dissolve PLA when used as a support material. In this case, ABS OR Polycarbon...
Wed, 13 Apr, 2016 at 2:18 PM