Hardware Setup
Printer Configuration Type - Bowden Extruder
The extruder assembly (located on the back of the printer) uses stepper motors to drive filament thro...
Mon, 17 Aug, 2015 at 10:52 AM
Description:
1) Prior to installing your glass into the building area, we will need to add Bed Adhesion. Depending of what filament you are using, t...
Mon, 17 Aug, 2015 at 10:52 AM
Description:
Use this solution to help the printed parts adhere to the bed during the print.
1) Find your material in the table below
2) Apply th...
Mon, 17 Aug, 2015 at 10:52 AM