Hardware Setup
Printer Configuration Type - Bowden Extruder
The extruder assembly (located on the back of the printer) uses stepper motors to drive filament throug...
Mon, 17 Aug, 2015 at 12:44 PM
Description:
1) Prior to installing your glass into the building area, we will need to add Bed Adhesion. Depending of what filament you are using, thi...
Mon, 17 Aug, 2015 at 12:44 PM
Description:
Use this solution to help the printed parts adhere to the bed during the print.
1) Find your material in the table below
2) Apply the c...
Mon, 17 Aug, 2015 at 12:44 PM