Troubleshooting

WEP Secured Networks not Supported
WEP Secured networks are not supported by the AstroBox software. WEP has numerous security holes and was deprecated in 2004 by the IEEE. Some routers still ...
Wed, 18 Apr, 2018 at 3:26 PM
HD - What is a "mouse bite" and how do I fix it?
Description: This solution goes over what a mouse bite is, potential causes of mouse bites, and how to fix them. You will need a set of wire or plas...
Mon, 17 Aug, 2015 at 12:25 PM
HD - Cleaning the Hot End and Nozzle
Description:   This solution will show you how to change a nozzle on any JR type hot end. This is done to switch between nozzle sizes or to remove the...
Mon, 17 Aug, 2015 at 12:25 PM
HD - Nozzle isn't Heating
Description: Is your nozzle(s)/hot end not heating up? Below are a couple steps for diagnosing the issue. Process: Hot End: As...
Mon, 17 Aug, 2015 at 12:25 PM
HD - Heat Bed Movement (Type 1)
Description: When the heat bed has difficulties moving up or down, this is caused by the Z-rod being out of alignment with the Z-motor. The followin...
Mon, 17 Aug, 2015 at 12:25 PM
HD - Heat Bed Movement (Type 2 & 4)
Description: The following instructions guide you troubleshooting issues regarding the bed not lowering or rising, particularly if the...
Mon, 17 Aug, 2015 at 12:26 PM
HD - Repetier-Host - Connectivity Troubleshooting
Description: Troubleshoot the cause of your connection issues by following the below options.   COM Port 1) In order for Repe...
Mon, 17 Aug, 2015 at 12:26 PM
How to check for continuity
The link at the bottom of this article is a short video that describes what continuity is and how to measure it with a multimeter. In short, an unbroken wir...
Tue, 24 Apr, 2018 at 9:01 AM