Rod Lubrication, cleaning the hot end and nozzle

AXIOM - Hot End - Nozzle Cleaning
Description: !!!!!!!! Do Not Clean the Nozzle While the Printer Is On !!!!!!!! HEAT UP THE HOT END TO THE APPROPRIATE TEMPERATURE FOR THE MA...
Fri, 29 Jan, 2016 at 5:15 PM
AXIOM - Rod Lubrication
It is very important to properly and regularly lubricate your printer. This will help your printer last longer and generate better quality print. We general...
Thu, 10 Sep, 2015 at 3:25 PM
Axiom - Replacing The Hobbed Bolt
Description This guide provides instruction on replacing the hobbed bolt. The hobbed bolt is a grooved bolt inside the extruder assembly. It...
Mon, 8 Feb, 2016 at 2:36 PM
AXIOM - Belt Tensioning
Description If your AXIOM has the new version hot end with four screws on the top, you do not need to adjust the tension of the belts.  Over ...
Fri, 17 Feb, 2017 at 2:21 PM
Axiom/Axiom 20/AXIOMe grounding
ESD (Electro-Static Discharge) is responsible for damaging all sorts of electronic devices.  The grounding pathway on an Axiom series machine serves to dire...
Tue, 2 May, 2017 at 11:48 AM