Airwolf 3D provides recommended settings for the software Cura. The following walks through how to implement these settings. 



1) HDL Public Dropbox

  • Here you will find the recommended settings under the folder "Slicing Configurations"


2) Locate the applicable settings for your print

  • Example; JR2x_ABS_Normal would be a dual hot end that is printing a single head ABS print in normal quality


3) Save this ".ini" into a folder to navigate to later


4) Open Cura. In the "File" drop down menu, select "Open Profile"


Please open a Tech Ticket if you have any questions or need assistance with this process.