Cura

HDL - Cura - Installing and Setup
Description: Since the HDL manual was written, we have come out with new recommended software! This Guide with assist you with setup. The follo...
Mon, 17 Aug, 2015 at 12:55 PM
HDL - Astroprint and Cura Settings
Description: The following instructions guide you through the settings for Astroprint.com. To see full details on astro's cloud based slicing, pl...
Mon, 17 Aug, 2015 at 12:55 PM
HDL - Using Airwolf 3D's Recommended Settings
Description: Airwolf 3D provides recommended settings for the software Cura. The following walks through how to implement these settings.    ...
Mon, 17 Aug, 2015 at 12:58 PM
HDL - Change Settings at Different Z Heights
Description: This solution walks through the process of changing settings during a single print, per layer(s). This is for the current version 3.2. Th...
Mon, 17 Aug, 2015 at 1:01 PM