How-to Guides
Please see the following youtube video for instructions: AXIOM Dual Nozzle Leveling Tutorial The Gcode for dual nozzle calibration is attached. ...
Wed, 11 Oct, 2017 at 10:31 AM
This guide will instruct you on how to replace the nozzle on the AXIOM series of 3D printers. Preheat the hot end to the temperature of the last used ...
Wed, 30 Mar, 2022 at 4:37 PM
This guide will show you how to replace a standard bowden ERC unit with a Direct Drive ERC unit. You can also use it as a guide to swap out a Direct Drive E...
Wed, 30 Mar, 2022 at 2:52 PM
The Wolfbox is the Wi-Fi board that will give you control of the printer, and how you will start print files over Wi-Fi. It will be attached to the astro...
Fri, 18 May, 2018 at 1:51 PM