How-to Guides

EVO - Change/Reset ScreenLock Passcode
By default, your Touchscreen passcode is 0000. To change your password, navigate to SETTINGS > DIAGNOSTICS > CHANGE PASSWORD. Passcodes must be 4-...
Fri, 9 Nov, 2018 at 2:59 PM
EVO - Replace HEPA and Carbon Filters
Every 1000 hours of print time, replace both HEPA and carbon filters. 1. With the build plate clear, select CONTROL 2. Use the pointer to push the Z...
Fri, 9 Nov, 2018 at 2:58 PM
EVO - Replace Brass Cleaning Brush
Replace brass brush every 1000 hours, or sooner, depending on condition. 1. Place machine in SERVICE MODE 2. Use 2.5mm hex wrench to unscrew bo...
Fri, 9 Nov, 2018 at 3:01 PM
EVO - Replacing Genesis Board
(should take 30 minutes or less): *pictures to follow 1) Turn machine off 2) Remove back panel 3) Take pictures of wiring connections (they should...
Tue, 5 Nov, 2019 at 2:55 PM
EVO - Installing Octoprint
Please note: OctoPrint Anywhere will be succeeded by The Spaghetti Detective, a faster and more powerful remote monitoring tool. If you are using the new Sp...
Wed, 29 Jan, 2020 at 3:21 PM