Filament

HD2x - What is a "mouse bite" and how do I fix it?
Description: This solution goes over what a mouse bite is, potential causes of mouse bites, and how to fix them. You will need a set of wire or plas...
Mon, 3 Aug, 2015 at 11:59 AM
HD2x - About the Filaments
TABLE OF 3D PRINTER MATERIALS AND FILAMENTS 3D PRINTING MATERIALS Sorty by Name Description Sort by User Class ABS Add ...
Mon, 3 Aug, 2015 at 11:59 AM
HD2x - Loading Filament
Printer Configuration Type - Bowden Extruder The extruder assembly (located on the back of the printer) uses stepper motors to drive filament throug...
Mon, 3 Aug, 2015 at 10:09 AM
Complete Material's List For HD2x
Description:   The following is a list of our printers and the materials compatible with each model. For information on where to purchase some of thes...
Mon, 17 Aug, 2015 at 12:33 PM
HD2x - Dual-Material Combinations
Description:   The following is a list of compatible HDR and HD2x material combinations and the uses that would be associated with the combination. In...
Mon, 3 Aug, 2015 at 10:08 AM
HD2x - Purchasing Filament
Description: All of our printers use filament with a nominal diameter of 3mm and an actual diameter of 2.85±0.10mm The following list will ...
Mon, 3 Aug, 2015 at 12:00 PM
HD2x - Acetone Vapor Treatment
Description: This is a simple 7 step process to creating a polished look to your ABS parts using acetone. Required Tools: ...
Mon, 3 Aug, 2015 at 12:00 PM
HD2x - Coating Parts with EnviroTex Lite
Description: The following will give you step by step instructions for coating your ABS part with epoxy to toughen and help protect your part from ...
Mon, 3 Aug, 2015 at 12:00 PM
HD2x - Dissolving PLA
Description:   The following describes our new EXPERIMENTAL process used dissolve PLA when used as a support material. In this case, ABS is used as th...
Tue, 4 Aug, 2015 at 3:15 PM
HD2x - Dissolving HIPS
Description: This is an Experimental solution for dissolving HIPS material off of ABS parts. Limonene Product Selection: When print...
Mon, 3 Aug, 2015 at 12:01 PM