How-to Guides

Remove bowden tube from Axiom Single Bowden Extruder
If you get filament caught in your bowden tube, it may become necessary to remove the tube to get it out.  This can easily be done by pressing the black pus...
Wed, 25 Apr, 2018 at 3:00 PM
Axiom Extruder Assembly - Dissassembly
Here are the components for the Axiom Extruder Assembly Take the bearing, place it on the rod, with one washer on each side. ...
Fri, 29 Jun, 2018 at 1:44 PM
Securing the ERC cable - Axiom Single/Axiom Dual/AxiomE
There are two zip ties to secure the ERC grey cable harness in place. To make sure that the traveling of the head doesn't pull on and stress any of th...
Mon, 19 Mar, 2018 at 4:02 PM
Nozzle Replacement on AXIOM 3D Printer - Tech Tip (Updated 2022)
This guide will instruct you on how to replace the nozzle on the AXIOM series of 3D printers.  Preheat the hot end to the temperature of the last used mate...
Wed, 30 Mar, 2022 at 4:33 PM