Filament
Printer Configuration Type - Bowden Extruder
The extruder assembly (located on the back of the printer) uses stepper motors to drive filament thro...
Mon, 17 Aug, 2015 at 10:56 AM
Description:
This solution goes over what a mouse bite is, potential causes of mouse bites, and how to fix them. You will need a set of wire or plasti...
Tue, 4 Aug, 2015 at 11:46 AM
TABLE OF 3D PRINTER MATERIALS AND FILAMENTS
3D PRINTING MATERIALS
Sorty by Name
Description
Sort by User Class
ABS Add ABS to my shopping...
Tue, 4 Aug, 2015 at 11:46 AM
1) Heat your hot end to the temperature of the filament currently loaded in your machine (example; 240C for ABS).
This can be done throu...
Wed, 19 Aug, 2015 at 12:06 PM
Printer Configuration Type - Bowden Extruder
The extruder assembly (located on the back of the printer) uses stepper motors to drive filament throug...
Tue, 4 Aug, 2015 at 11:46 AM
Description:
The following is a list of our printers and the materials compatible with each model. For information on where to purchase some of thes...
Mon, 17 Aug, 2015 at 12:32 PM
Description:
All of our printers use filament with a nominal diameter of 3mm and an actual diameter of 2.85±0.10mm
The following list will dire...
Tue, 4 Aug, 2015 at 12:14 PM
Description:
This is a simple 7 step process to creating a polished look to your ABS parts using acetone.
Required Tools:
1 G...
Tue, 4 Aug, 2015 at 3:13 PM
Description:
The following will give you step by step instructions for coating your ABS part with epoxy to toughen and help protect your part from th...
Tue, 4 Aug, 2015 at 3:14 PM
We have a comprehensive library of videos available on our YouTube Channel.
Please open a Tech Ticket if you have any questio...
Tue, 4 Aug, 2015 at 3:16 PM