How-to Guides

Unpacking and Setting Up the AXIOM and AXIOM 20 3D Printers (Updated 2022)
This guide will show you how to unbox and set up the AXIOM series of 3D printers. Shown here is the AXIOM 20, as the other models will be very similar. ...
Thu, 7 Apr, 2022 at 10:25 AM
Replacing the belt tensioner on the Axiom 20 ERC
Earlier Axiom 20 machines may need their belt tensioners replaced if experiencing an  inconsistent first layer height. A tighter belt forces the nozzle to p...
Mon, 12 Nov, 2018 at 1:03 PM
Axiom 20 replace Z coupling
Loosen the set screws on the coupling. Remove the four screws through the block at the bottom. Remove the two screws through the block at the top. L...
Thu, 25 Jan, 2018 at 3:09 PM
Restring the Belts on the Axiom 20 ERC
If you've recently disassembled your ERC, you'll want to reassemble it making sure the following: The left mounted motor has the belt pulley mount...
Wed, 18 Apr, 2018 at 11:05 AM
AXIOM 20 Dual Nozzle Direct Drive - RAMBo Detailed Wiring Diagram
Description:   Wiring should only be handled when instructed to do so by an Airwolf 3D technician. Wire coloring may vary. This is a detailed wiring d...
Wed, 18 Apr, 2018 at 1:09 PM
Remove Axiom 20 hotend from ERC
Begin by turning the printer off and unplugging it from the wall.  Remove the back panel.  See the grey cable coming from the print head.  Take a picture o...
Wed, 22 Aug, 2018 at 11:12 AM
Installing a HEPA Filter
Purpose of this tutorial: The attached PDF will  guide you through the process of installing the Axiom HEPA filter on your machine. How does it work: ...
Tue, 26 Feb, 2019 at 4:32 PM
Harness Restrain Installation
Description: . This  guide will walk you through the process of installing a restrain on your Axiom 20 ERC harness. Issue being resolved: This guide i...
Fri, 15 Mar, 2019 at 4:35 PM