Hardware Setup
Printer Configuration Type - Bowden Extruder
The extruder assembly (located on the back of the printer) uses stepper motors to drive filament throug...
Mon, 17 Aug, 2015 at 11:13 AM
Here are some photos showing the zip ties, and how the bed is tied down. This is useful if customers ask when they are sending the printer back for RMA
...
Wed, 18 Apr, 2018 at 3:24 PM
Description:
1) Prior to installing your glass into the building area, we will need to add Bed Adhesion. Depending of what filament you are using, thi...
Mon, 17 Aug, 2015 at 11:13 AM
Description:
Use this solution to help the printed parts adhere to the bed during the print.
1) Find your material in the table below
2) Apply the c...
Mon, 17 Aug, 2015 at 11:13 AM