Troubleshooting

AXIOM - Filament Stuck
Description This solution will guide you through removing filament from the hot end that may have gotten stuck from swelling or broken off inside o...
Wed, 9 Sep, 2015 at 1:33 PM
Remove the Bowden Tube from AXIOM or AXIOM Dual
1) Remove the top acrylic panel.   -- 2) Heat hot end specific to material loaded (i.e. ABS 240C) -- 3) Gently move tubi...
Wed, 7 Dec, 2016 at 11:40 AM
How to cancel or stop a print on all AXIOM model printers
This solution will instruct you on the proper way to stop or cancel a print for any reason with using an AXIOM / AXIOMe / AXIOM Dual    P...
Fri, 17 Feb, 2017 at 3:43 PM
Bed Adhesion
AXIOM - Bed Adhesion Description: This guide provide tips and tricks for proper bed adhesion.  The glass p...
Wed, 18 May, 2016 at 6:20 AM
AXIOM - Prints Offsetting (Belt Tensioning)
Description Over time the belts may need to be tightened. This solution includes all steps taken to correctly tighten your belts. ...
Fri, 16 Oct, 2015 at 11:43 AM
Clean out the hot end AXIOM Bowden Tube single or dual
Description: You'll learn the steps on how to clean out the AXIOM Bowden tube single or dual nozzle hot end. Process:   1) Preheat the printer...
Wed, 12 Apr, 2017 at 11:08 AM
Axiom 20/Axiom/AXIOMe Bed Sensor Continuity Check
At the beginning of each print, your Axiom will go through it's auto-leveling procedure.  During this process, it will touch the nozzle tip to the me...
Mon, 3 Jul, 2017 at 2:08 PM